• 918博天堂(中国区)人生就是搏!

    首页 > 产品中心 > SINOMA装备平台 > 预热器
    预热器
    新一代预分解系统技术特点
    满足 1, 000t/d 12, 000t/d 各种规模的生产能力
    Suitable for production lines of 1, 000 t/d 12, 000 t/d;
    对原、燃料的适应性广。分解炉型简单,易操作
    Suitable for a wide range of raw materials and fuels; the precalciner is uncomplicated in structure and easy to operate;
    针对不同燃料,如烟煤、无烟煤、劣质煤、重油、原油、天然气等设有针对性的解决方案
    Targeted solutions for different fuels, including bituminous coal, anthracite, inferior coal, heavy oil, crude oil and natural gas;
    对高碱或高氯原燃料,配备专门设计的旁路放风系统
    Available by-pass solutions for raw meal or fuels with high alkali or chlorine content;
    采用分级燃烧技术,脱氮可达 70%;采用 SNCR 技术,脱氮可达 80%
    NOx-reduction by staged combustion in the precalciner by up to 70%; up to 80% with SNCR;
    拥有处置城市生活垃圾和各种工业废渣、污泥和有毒有害危险废弃物的技术,对各种废弃物进行资源化、无害化处理,
    消除环境污染
    A wide range of solutions for converting daily garbage, industrial wastes, sludge and toxic waste into recycling resources, toxic
    materials harmless treatment;
    系统压力损失低、废气温度低、能耗低,气料分离效率高

    Low exhaust gas temperature, low pressure drop and energy consumption; highly efficient cyclones designed for separating materials and gas.
    结构特点
    分解炉容量大,燃烧分解效率高;有管道式喷旋型、三喷腾型及喷旋结合型等多种型式的在线分解炉
    High volume calciner providing for high precalcination rate; available calciners in different designs, including curved-duct structure,
    triple-section structure and combined structure;
    适应各种煤质、石油焦、重油和天然气,可燃烧有热值的废弃物
    Adaptability to different types of coal, petcoke, heavy oil and natural gas; adaptability to alternative fuels with their specific heat
    value;
    分解炉、燃烧器合理布置及三次风合理分配,降低 NO× 的排放浓度
    Reduced NOx emission by well-designed layout for calciner burners and tertiary air inlets;
    采用高分离效率、低压力损失的旋风筒
    Cyclones designed for high separation efficiency and low pressure drop;
    采用新型耐热材料的分片式内筒,使用寿命长,更换方便
    Segmented inner tubes made from new type of heat-resistant cast steel, providing long service life and easy maintenance;
    采用固定式弧形撒料板增强物料的分散和换热效率
    Fixed splash plates are arc-shaped, which can better distribute materials and increase heat exchange efficiency;
    设有密封性能好,动作灵活的翻板阀,避免了气流短路,易于维护 预热器

     

    Flexible flap valves with good sealing effects, which prevent airflow short-circuit and facilitate easy maintenance of preheater
    友情链接: